Ginjer

What is the process to add devices on Ginjer?

Please follow the steps outlined in the link to add devices on Ginjer: https://docs.ginjer.io/#preconfigureddevices

    • Related Articles

    • How to add devices on Production account ?

      There are three steps to onboard the devices on Production account. Register the device To register the devices on SenRa LNS, please follow the link : https://docs.senraco.io/ap/mgmt/#register-devices Activate the device To activate the devices on ...

    • How to send downlink from Ginjer ?

      To send a downlink from Ginjer, controller must be added on the device hardware. Kindly follow the device hardware configuration steps outlined below: 1. Log in to your Ginjer account. 2. Navigate to the "Setup" section. 3. Access the "Device" ...

    • How to generate Ginjer key ?

      To generate a Ginjer key, follow these steps: Log in to your Ginjer account. Go to the "Setup" section. Navigate to the "Network" section. Choose the configuration for the desired network. Click on "Generate Ginjer Key." Please check below images: ...

    • Is there a process for forwarding data from Ginjer to any third-party application?

      Yes, Ginjer has an API through which clients can forward data from Ginjer to any third-party application. The only condition is that the third-party applications must support API features. For more information, please feel free to contact us at ...

    • Difference between pre-configured and non-pre-configured devices?

      Pre-configured devices are already configured in Ginjer, and clients need to simply forward the device's data to Ginjer. Ginjer will extract the required output from the device's hex output value and convert it into a human-readable form. For more ...