How to set a notification target for Ginjer on SenRa LoRaWAN® Network Server (LNS)?
To set notification target for Ginjer on SenRa LNS, please follow the below steps :
- Choose the device you want to configure.
- Click on the gear icon to access the Edit settings.
- Navigate to the Notification target page.
- Activate the status.
- From the "Forward to" options, select Ginjer.
- Input the Ginjer Authorization Key obtained from Ginjer.
- Save your settings.
Related Articles
How to Register the Gateway on SenRa LoRaWAN® Network Server (LNS)?
To register a gateway on the SenRa LoRaWAN® Network Server (LNS), please follow the steps outlined in the SenRa documentation by using the following link: https://docs.senraco.io/dev/gw/Registration/How to forward data from network server to application server ?
To forward data from network server to application server, need to set device notification target. To set notification target for a device on SenRa LNS, please follow the steps outlined in the SenRa documentation by using the following link: ...How to create an account on the SenRa LoRaWAN® Network Server (LNS)?
To create an account on the SenRa LNS, visit portal.senraco.io , and click on 'Create New Account,' or use the provided link : https://portal.senraco.io/#/homeHow to register or add device on SenRa LoRaWAN® Network Server (LNS)?
To register a device on the SenRa LNS, please follow the steps outlined in the SenRa documentation by using the following link: https://docs.senraco.io/dev/dev/#device-registrationWhat troubleshooting steps should be taken when a device successfully sends an uplink on SenRa LNS, but Ginjer fails to receive the data, despite having the data forwarding from SenRa LNS to Ginjer already set up?
When the LNS has received data from the device but has not forwarded it to Ginjer, the following reasons could be possible: Port 0: If the device has sent the data on port 0, it will not be forwarded to Ginjer as this port is default reserved for MAC ...